Description

Daewoo 470LC-V 2001 Service Manual – Factory Specs for Excavator Maintenance

I’ve seen too many guys get burned by aftermarket manuals that list torque specs that don’t match the factory bolts. If you’re working on a Daewoo 470LC-V 2001 Service Manual is the real thing – OEM documentation straight from the manufacturer. None of this generic garbage. When you crack open a hydraulic system on a 470LC-V, you need the exact part numbers for seals and the correct sequence for pressure checks. This manual has them. It’s the same book the dealer techs flipped through in 2001.

Every page of this 242-page document was printed by Daewoo in September 2001 for serial number 1001 and up. The table of contents alone lists 16 specific safety labels, each with its own part number. That’s the level of detail you get. No aftermarket copy will match this.

Safety Labels and Their Locations

Page 1-4 of the manual lays out every safety label on the machine. Warnings for high pressure cylinder (190-00122), warnings for rotating parts (190-00694), even the tag for leaving the operator’s seat. If you skip verifying these labels during a rebuild, you’re opening yourself up to liability. I keep a copy of this manual in the cab so operators can reference it before starting.

What Does the Operating Controls Section Cover?

Section 2 starts on page 2-1 with component locations. You get the starter switch, engine speed control dial, travel speed selection switch, and all the joystick switches. The instrument panel section includes the multifunction gauge and graphic information – that’s how you read engine coolant temperature, fuel level, and diagnostic codes. Without this manual, you’re guessing which warning light means what.

16 Safety Labels to Verify Before Operation

Numbered labels run from 1 to 16, each with a specific Daewoo part number. Label 4 is for the high pressure cylinder. Label 5 covers track tension adjustment. Label 8 warns about high temperature hydraulic oil. If you’re replacing a label after painting or repair, you match the part number exactly. This manual lists them all on two facing pages.

Check the Excavator Rated Lift Capacity Tables on Page 1-41

Before you pick up any load, you need the lift capacity tables. Page 1-41 gives you the rated lift capacities in digging mode. Overloading an excavator is how booms crack and tracks come off. The manual includes all the safety precautions for lifting – something the aftermarket PDFs leave out entirely. I’ve seen shops that use third-party specs end up with a hydraulic line burst because they used the wrong relief pressure.

Daewoo 470LC-V 2001 Service Manual: Factory Documentation

This isn’t a re-scan of a copy. The OCR excerpt shows the original OEM text: “Daewoo reserves the right to improve our products in a continuing process…” – that’s the real deal. If you’re pairing this with related equipment, check the Daewoo Musso Service Manual – Factory OEM Specs for 1465-Page Workbench for drivetrain insights. For the smaller loader line, the Daewoo 661LA, 662NA, 662LA 2000 Service Manual – Factory OEM covers similar safety protocols. And for a different type of equipment, the Daewoo Forklift Service Manual Contents (SB4178E00) shows how consistent Daewoo’s factory documentation stays. When you need to understand the physics of the Internal Combustion Engine that powers this excavator, or the basics of a Manual Transmission used in some variants, these external links add context – but the manual itself is the final word.

Frequently Asked Questions

Does this manual cover the electrical system and wiring diagrams?

The manual focuses on operation and safety, but the instrument panel section (starting page 2-14) includes functional checks for gauges and the multifunction display. For full wiring diagrams, you would need the service repair manual – this is the operation and maintenance manual.

Can I use this manual for a Daewoo 470LC-V with serial number below 1001?

No. The manual specifically states serial number 1001 and up. Earlier machines may have different safety label locations and control panel layouts.

What torque specifications are included in the manual?

Explicit torque values are not listed in the table of contents, but the maintenance section covers procedures that require proper tool use and tightening sequences. For cylinder rebuilds, you would refer to the general hazard precautions on page 1-13 which address high pressure lines and cylinder hazards.

How many pages are dedicated to safety labels?

Pages 1-4 through 1-11 cover the location and part numbers for all 16 safety labels. That includes warnings for high voltage, hot coolant, accumulator handling, and front attachments. Each label has a corresponding part number like 190-00688 or 2190-3386A.

Don’t waste time with knock-off manuals that omit the safety label part numbers or give you generic lift tables. The factory manual costs less than one hour of shop labor and saves you from tracking down a single wrong bolt. Access the Factory Manual and keep it in your tool box – you’ll thank me when you’re pulling the cylinder off a 470LC-V.