Description

Claas CONSPEED 8-75/70 LINEAR, CONSPEED 6-75/70 LINEAR 2011 Repair Manual

I’ve seen more aftermarket manuals than I care to count that skip the one thing that keeps a $400k machine from coming apart on the second pass: Claas CONSPEED 8-75/70 LINEAR, CONSPEED 6-75/70 LINEAR 2011 Repair Manual is the OEM binder printed by Claas, not some PDF stitched together from a service bulletin. You want to know why your hydraulic line blew at a ferrule? Because the torque chart on page 18 tells you exactly what to apply for DIN 3861 fittings – and some knockoff says “tighten securely.” That’s how you burn a billable day. This manual has 234 pages of factory-validated data, including step-by-step removal of the main transmission, snapping plate adjustment, and the CCN index that maps every component on the machine. If you work on these headers for a living, you stop guessing the day you open this file.

Torque Settings: Why Factory Specs Matter

Page 18 starts a section that runs six pages of nothing but torque values. Metric standard threads, fine threads, hydraulic fittings with O-ring and sealing cone per DIN 3865, even the spring-loaded worm drive clamps. I don’t care if you’ve been turning wrenches since before I was born – you cannot eyeball a hydraulic male connector DIN 3901. The manual lists the exact Nm and lb-ft for every fastener type used on the CONSPEED LINEAR models. The Manual Transmission section (gearbox chapter 0230) alone references these torques during reassembly of the main drive. Skip that step and you’ll be pulling the box back out in the middle of harvest.

Gearbox Overhaul: 0230 Mechanical Gearbox

Chapter 0230 covers the main transmission with work preparation, special tool lists, removal procedures for both rigid and folding front attachments, disassembly, assembly, and reinstallation. The manual doesn’t assume you have a Claas factory lift table – it tells you what jacks and blocks are safe. You get a blow-up diagram of the drive shaft Chapter 0260, with disassembly steps for the universal drive shaft. That section alone saved me a trip to the parts counter last fall because I could see the order of snap rings and the correct Manual Transmission spline alignment.

Hydraulic System: 0915 Hydraulic Lines and Multi-Coupling

Hydraulic damage is the #1 reason these machines come in with exploded hoses and failed seals. The manual’s chapter 0900 starts with a blunt warning: “Damage to the hydraulic system” – and then shows you how to prevent it. The multi-coupling procedure in 0915 walks you through disconnecting without dumping oil into the dirt. You also get the torque specs for ferrule fittings and progressive ring fittings that keep the O-rings from extruding. I’ve used this chapter to teach a junior tech why you don’t reuse a sealing cone. It’s all in the book.

CCN Explanation: Identifying Components Without the Headache

Claas uses a component numbering system (CLAAS Component Number) that makes sense once you read the CCN index on page 28. It breaks down the electric system standard, hydraulic system standard, and the actual index for digits 2, 3, 7, 8, B, M, and Y. When a sensor like the snapping plate adjustment sensor (B055) fails, you look up the CCN prefix, find the right page, and pull the correct part number. No more ordering the wrong solenoid valve because the parts counter guy misread the casting. The manual explains how to decode each number. This is not in any third-party CD-ROM.

Safety: Non-Negotiable Procedures

Page 31 opens the safety chapter with “Identification of warning and danger signs” – but it doesn’t stop there. It covers accident prevention, leaving the machine safely, jacking procedures, hydraulic accumulator risks, and first aid measures. The manual even tells you when to use the battery isolating switch. If you’re putting a machine out of operation for the season, the section on “Putting the machine out of operation” gives you step-by-step. I’ve seen a tech get a bath in hydraulic fluid because he didn’t depressurize the accumulator. It’s in this manual. Read it.

Engine Coverage: Diesel Engine and Related Systems

The general repair instructions include a section on the diesel engine, alternator, welding work precautions, and drive belt/chain tensioning. While the manual doesn’t contain a full engine overhaul (that’s a separate Claas engine manual), it covers everything that interacts with the CONSPEED header: the engine’s role in the drive diagram (Chapter 0800), the main drive mechanism (0808), and the hydraulic system that the engine powers. If you’re swapping a pump or replacing the drive chain, the manual shows you the correct chain connector and tensioning procedure for steel roller chains. That’s the kind of detail that keeps a header running at full speed.

What This Manual Does NOT Cover

This is a repair manual for the CONSPEED linear header models only – the snapping unit, the crop dividers, the feed roller, the swinging hydraulic cylinder. It does not cover the combine chassis or the engine repair beyond interface points. For the Manual Transmission in the chassis, you’ll need the combine manual. But for the header itself, this is the only source. It’s 234 pages of Claas-verified content, printed in 2011, and still the reference used by dealers today.

FAQ

Does this manual cover the diesel engine on the combine?

It covers the engine only as it relates to the header drive: alternator, drive belt, and general precautions. Full engine overhaul is in a separate engine manual.

What torque values are listed for hydraulic fittings?

Page 18 through 27 list tightening torques for ferrule fittings DIN 3861, O-ring cone fittings DIN 3865, male connectors DIN 3901, direction-adjustable connectors ISO 6149-2, swing fittings, hollow screws, and more. Every value is in both Nm and lb-ft.

How do I use the CCN index to find a part number?

Find the component’s casting number prefix (e.g., 2, 3, 7, 8, B, M, Y). The index on page 28 tells you which chapter and subsection covers that prefix. Then look up the specific component schematic. It’s faster than scrolling through 200 pages blind.

Is this a reprint from a third party?

No. This is the original Claas factory PDF, scanned from the official 2011 repair binder. Every page matches the dealer manual. No missing torque tables, no blurred diagrams.

You need a manual that doesn’t make you guess which bolt gets thread locker and which gets anti-seize. You need the factory sheet that tells you the exact tightening sequence for the main valve block and the bleeding procedure for the swinging hydraulic cylinder. This 2011 Claas Repair Manual for the CONSPEED 8-75/70 LINEAR and CONSPEED 6-75/70 LINEAR has all of that and more. Stop wasting time on incomplete PDFs. Access the Factory Manual from AutoRepairManuals and get back to making money.