Case 680L 2001 Operators Manual – Factory Operations Reference

Description

If you are running a 680L loader backhoe and you don’t have the Case 680L 2001 Operators Manual in the cab, you are flying blind. I’ve seen guys snap hydraulic lines because they guessed at the charge pressure. Don’t be that guy. This is the factory Case Operators Manual for the 2001 680L, 152 pages of what Case actually wrote, not a reprint from some third-party who thinks they know better. That OEM spec sheet is the difference between a safe job site and a trip to the hospital. Every operator, from greenhorn to old hand, needs this in the glovebox.

Safety Section: Not Optional Reading

First thing you’ll hit is the Safety section starting on page 9. Case puts the safety alert symbol front and center, and they define DANGER, WARNING, CAUTION in red, orange, and yellow. That ISO two-panel pictorial decal explanation? It’s on page 2. I don’t care how many hours you have – read it. One misstep on a job site and you’re looking at serious injury or worse. The manual even tells you to clear the area of other persons. That’s not a suggestion. Case SL1-b, SL2 1995 Operators Manual – Factory Specs also uses the same safety structure, so once you know one Case manual, you know them all.

Specifications: Why You Need OEM Numbers

Page 27 is where the hard numbers live. Engine oil capacity, hydraulic fluid type, tire pressures, charge pressure for the loader circuit – all in Imperial units. I’ve chased aftermarket spec sheets that had the wrong viscosity for the hydraulic system. That costs you seals and downtime. The 2001 680L specs here are directly from Case Engineering, not a guess. If you need to know the lift capacity at full height or the SAE rating, it’s all in these pages. Don’t trust a generic web search when you can have the factory document sitting on your bench.

Controls and Instruments: Learn the Layout Before You Climb In

Starting page 41, the manual walks you through every lever, pedal, and gauge. The 680L has a multi-function joystick for the loader and backhoe. You need to know which position gives you float and which gives you detent. The instrument panel includes a tachometer, temperature gauge, and warning lights. If you ignore a flashing red light because you didn’t read page 52, you’ll pop a seal. Case SV212, SV216, SV208, SV210, SV223 Operators Manual – 214 Pages covers similar controls, but this manual is specific to the 680L – don’t mix them up.

Operating Instructions: How to Use the Machine Correctly

Beginning on page 65, you get the full operating sequence: pre-start checks, cold weather startup, driving on grades, loading the bucket, and using the backhoe stabilizers. Case also includes guidance on towing – if you’ve ever seen a loader roll because someone didn’t engage the parking brake, you know why this matters. The manual even warns about using a Manual Transmission for transport; it’s not the same as a powershift, and the 680L’s gear pattern is unique. Page 73 has the load chart for the backhoe. Do not exceed those limits.

Lubrication and Preventive Maintenance: Keep It Running

Page 93 starts the lubrication schedule. Grease fittings on the loader arm pivot points, backhoe swing cylinder, and axle U-joints – all listed with recommended intervals. The manual tells you which Case grease part number to use, not some substitute. Oil change intervals are given in hours, not months. If you’re running the 680L in dusty conditions, you’ll want to shorten those intervals. The manual also covers filter part numbers and fuel system bleeding. Case SV212 SV216 1994 Operators Manual – Factory Specs has a similar maintenance section, but the 2001 680L uses a different hydraulic filter – don’t assume interchangeability.

One more thing about the wiring: the manual includes a basic electrical diagram for the starting circuit. That’s on page 112. For a deeper dive into general Manual Transmission theory, you can check other sources, but the Case manual is your authority for this machine.

Does this manual cover the fuel system injection pump removal?

No. This is an operators manual, not a service manual. It covers daily checks, fuel filter replacement, and bleeding procedures. For injection pump overhaul you need the Case service manual.

Is this a reprint or original factory document?

This is a direct digital copy of the original 2001 Case publication, 152 pages, part number 9-12791. It includes the OEM safety decal explanations and factory torque charts. No third-party edits, no missing pages. What you see in the table of contents – Safety, Specifications, Controls, Operating Instructions, Lubrication – is exactly what you get.

You can keep guessing and risk bending a frame, or you can Access the Factory Manual and have the real numbers in front of you. This file is ready to pull up on a tablet or print for the cab. Case built the 680L to a spec – now you have that spec in your hands.