Description

Case 680CK Series E 1995 Operators Manual

Case 680CK Series E 1995 Operators Manual – this is the book that should be in the door pocket of every 680CK Series E loader backhoe. I’ve seen guys try to run a machine with a photocopy of a third-party scan, and that’s how you blow a hydraulic line because the warm-up procedure is missing. This factory manual is 108 pages of what the factory wants you to know. No shortcuts, no reprints. Original OEM print from Case.

Safety Starts on Page 2 – Not an Afterthought

Page 2 hits you with the big warning: “Improper operation of this machine can cause injury or death.” The manual tells you to read all safety decals, clear the area, and understand the controls before you even turn the key. That’s not fluff. That’s the difference between walking away at the end of the day and a trip to the ER. If you’re renting or loaning this machine, you’re legally responsible to make sure the operator reads this section. Page 6 covers the Roll-Over Protective Structure – which means you don’t weld on it and you wear the seat belt. Period.

Specifications on Page 10 – What the Machine Can Do

Need to know the operating weight, bucket capacities, or travel speeds? Page 10 gives you the hard numbers. Not a range, not “approximately.” Factory spec. If you’re digging with a machine that doesn’t match these numbers, you’re guessing. And guessing costs hours and parts. The specs section also includes fluid capacities, tire sizes, and hydraulic system pressures. Use them when you order parts – saves you the “I’ll just match it up” trip to the dealer.

Machine Operating Instructions: Control Layout and Cold Weather Start

Starting on page 16, the manual walks you through every lever, pedal, and gauge. Then it covers engine run-in, starting, warm-up, idling, stopping, and starting aids. The ether injector and coolant heater sections on pages 26-27 are critical for cold weather operation. Skip reading those and you’ll either cook the glow plugs or never get the engine to fire. The cold weather operation section also tells you about alcohol evaporation – that’s for the air system, not the fuel. Pay attention.

Loader and Backhoe Operation: Factory Tips

The Loader Operating Instructions and Loader Operating Tips are separate chapters. Same for the backhoe. These aren’t generic “push this lever” instructions. They tell you how to avoid side-loading the bucket, when to use the stabilizers, and what to do on steep grades (page 29). Backhoe operating tips cover trenching technique and how not to fold the machine into a pretzel. If you’re a beginner, read these chapters twice. If you’re a pro, you’ll still catch something you’ve been doing wrong.

Fuels, Lubricants, and Maintenance Schedule

Page 40 or so – the Fuels and Lubricants section lists exact oil grades, hydraulic fluid specs, and grease intervals. The Maintenance/Lubrication chapter gives a checkup schedule, including the After Delivery Checkup. That’s the 50-hour inspection after a new or rebuilt machine arrives. Most manuals skip that. Case includes it because they know how many warranty claims come from ignoring it. Use the right grease – not “whatever’s in the gun.” There’s a Manual Transmission section inside too – if your 680CK has a manual trans, you need the lube specs from this book.

Who Needs This Manual

Home garage guys with a 680CK on their property. Rental yard owners who have to hand the book over with the machine. Any operator who wants to avoid a $4,000 transmission rebuild because they used the wrong fluid. This isn’t a shop manual – it won’t tell you how to split the machine – but it will keep you from wrecking it through pure ignorance. Pair it with a Case SL1-b, SL2 1995 Operators Manual – Factory Specs if you have those models too. Or check out the Case SV212, SV216, SV208, SV210, SV223 Operators Manual – 214 Pages for a different series.

Source Authenticity – OEM vs Aftermarket

The manual you’re looking at was printed in 1995 by Case Corporation (now CNH). It’s the same book that came in the plastic pouch on the machine. Aftermarket versions cut out pages, blur the diagrams, or guess at torque values. I’ve seen “reprints” that omit the safety decal locations. This is a direct scan of the OEM book, 108 pages, every warning intact. The Case SV212 SV216 1994 Operators Manual – Factory Specs is another example of same-origin documentation. If you see a PDF that’s 30 pages, it’s not the real thing.

FAQ

Does this manual cover the backhoe operation in detail?

Yes, the Backhoe Operating Instructions and Backhoe Operating Tips chapters give specific procedures for trenching, digging, and stabilizer use. It also covers safe transport with the backhoe attached.

What about the Manual Transmission – is the gearbox covered?

The manual includes a section on driving, shifting, and stopping the machine. It gives the recommended transmission oil type and capacity. For a full rebuild, you’ll need the service manual, but for daily operation and fluid changes this is all you need.

If you want to keep that old 680CK running without chasing ghost problems, Access the Factory Manual from AutoRepairManuals. It’s the same 108-page book the operator used when the machine was new. No guessing – just specs and procedures that work.